Leave Your Message
Products Categories
Hot Sale Products

NJP-800 Automatic capsule filling machine


    machine14


    machine1 machine41.jpg


    machine3 machine2




    machine5


    machine6

    With auto loading powder and capsule devices.

    machine7 machine8

    With capsule polishing machine and auto loading capsule function

    machine9 machine10

    Mold

    machine11 machine12

    Applying

    This machine is used for filling the powder or pellet into the capsule.

    Work Principle

    Capsule Part: Loading the empty capsule into capsule hopper, the empty capsule then get into capsule sowing plate, automatic make U turn, divide the top and body of capsule when pass by vacuum, automatic filling while come into dosage tray, it has automatic reject function if the capsule is flat or its top and body can not be divided. After that, automatic locking and output the final products.

    Powder or pellets part: Loading the medicine into medicine hopper, then the medicine automatic come down, (the machine stop automatically while no medicine), dosage tray going filling for five times, make the medicine save into

    medicine pole. Finally, medicine is filled into empty capsule

    Features

    1) Stowage seat and measuring plate are designed as one unit to make measuring plate and stowage rod without deviation phenomenon, avoid friction phenomenon between stowage rod and measuring plate, improve its precision highly, expand the machine's life .

    2) Ineligible capsule can be eliminated automatically(qualified rate not included), the medicine in the capsule can be recycled and be reused, increase greatly economic benefit.

    3) Easy dismantling , installation and clean, different mould can be replaced manually on the same machine

    4) Dust collector and vacuum pipe as well as waste air pipe are installed in the inner of the machine , avoid the air pipe becoming hard, broken and leakage , it is more convenient to clean the operating platform. The medicine can not contact with organic material meet the GMP the requirement

    5) The cap of stowage rod is made of stainless steel to replace original plastic cap to void breaking phenomenon; decrease the screws and caps on the platform

    6) Adopt the PLC,touch screen,the touch screen can set the password.Automatically set the parameter.printing data,etc function

    7) Can automatically alarm,automatically stop when the machine encounter a breakdown or lack material,the wearing parts are all imported

    Parameters

    Model

    NJP-800

    Capacity ( capsule/min)

    800

    Capsule Size

    No.00-5

    Filling rate

    ≥99%

    Power

    7kw

    Vacuum pump

    0.02-0.06Mpa

    Noise

    <80dBA

    Dust collector

    700m3/H, 2X105pa, 350*700*1000mm,40k

    Oversize and weight of machine

    970*820*1900mm, 900kg

    Configuration

    Name

    Specification

    Original place

    QTY

    Indexing box

    83D-06120 2L83D-10250 2R

    Shangdong China

    1

    Transducer

    6SE420-2UD21-5AA1

    Delta Taiwan

    1

    Main motor

    R27DM90L4 WB150

    GPG Taiwan

    1

    Touch screen

    TK6070Hi

    WENVIEW Taiwan

    1

    PLC

    VFD015B21A

    Delta Taiwan

    1

    Breaker

    3VU1340

    SIEMENS

    4

    contactor

    3TB43

    SIEMENS

    1

    contactor

    3TB41

    SIEMENS

    2

    Middle relay

    MY2NJ

    SIEMENS

    3

    Linear bearing

    SDE40Y

    SIEMENS

    4

    Linear bearing

    SDE20Y

    SIEMENS

    8


    HPJ-A Capsule polishing and sorting machine

    machine13

    Applying

    This machine is used for polishing and sorting capsule

    Features

    1. Small size, good looking, adjustable height and angles. It can be connected to any types of capsule filling machine.Timely polishing while producing is realized to raise the polishing quality and efficiency.
    2. It can automatically sort out capsules with low weight, empty body, scrap and loose piece to meet GMP standard.
    3. High quality stainless steel is used inside the medicine-polishing chamber. Quick connecting parts are also adopted to dismount the equipment more easily and to clean more thoroughly.
    4. Quick detachable brush and bearing are used for the main axle. The brush and bearing can be dismounted easily. The hair of brush will not drop. Different sizes of brushes can be changed to meet the needs of different medicines.
    5. A safety device is equipped. The speed of motor is controlled by converter. The polisher can continue to work for long time and stands moment of force.

    Parameter

    Model

    HPJ-A

    Speed

    7000pcs/min

    Power

    245W 220V 50Hz

    Machine size

    1300*500*1200(mm)

    Machine weight

    55Kg