Send Email
whatsapp
China NJP-1200 Automatic Capsule Filling Machine - Leading Suppliers and Factory for High-Quality Production
Machine with auto powder and capsule device
Machine with auto loading powder device
Applying
This machine is used for filling powder or pellets into capsules.
Work Principle
Capsule Part: Loading the empty capsule into capsule hopper, the empty capsule then gets into capsule sowing plate, automatic make U-turn, divide the top and body of capsule. When passing by vacuum, automatic filling while come into dosage tray, it has automatic reject function if the capsule is flat or its top and body cannot be divided. After that, automatic locking and output the final products.
Powder or pellets part: Loading the medicine into medicine hopper, then the medicine automatic come down, (the machine stops automatically while no medicine), dosage tray going filling for five times, make the medicine save into medicine pole. Finally, medicine is filled into empty capsule.
Features
- Nice appearance, exquisite workmanship, easy operation.
- Ineligible capsule can be eliminated automatically (qualified rate not included), the medicine in the capsule can be recycled and be reused, increasing greatly economic benefit.
- Easy dismantling, installation and clean, different mould can be replaced manually on the same machine.
- Dust collector and vacuum pipe as well as waste air pipe are installed in the inner of the machine, avoiding the air pipe becoming hard, broken and leakage. The medicine will not contact with organic material meet the GMP the requirement.
- The cap of stowage rod is made of stainless steel to replace original plastic cap to void breaking phenomenon.
- Adopt the PLC, touchscreen with password protection and auto setup parameter functions.
- Automatic alarm and stop when encountering breakdown or lack of material; wearing parts are all imported.
Parameters
| Model | NJP-1200 |
|---|---|
| Capacity (capsule/min) | 1200 |
| Capsule Size | No.00-5 |
| Filling rate | ≥99% |
| Power | 7kw |
| Vacuum pump | 0.02-0.06Mpa |
| Noise | <80dBA |
| Dust collector | 700m3/H, 2X105pa, 350*700*1000mm, 40kg |
| Size and weight | 1020*860*1970mm, 1000kg |
Configuration
| Name | Specification | Original place | QTY |
|---|---|---|---|
| Indexing box | 83D-061202L | Shangdong China | 1 |
| Transducer | 6SE420-2UD21-5AA1 | Delta Taiwan | 1 |
| Main motor | R27 DM90L4WB150 | Taibang Taiwan | 1 |
| Touchscreen | TK6070Hi | Weinview Taiwan | 1 |
| PLC | VFD015B21A | Delta Taiwan | 1 |
| Breaker | 3VU1340 | SIEMENS | 4 |
| Contactor | 3TB43 / 3TB41 | SIEMENS | 3 |
| Middle relay | MY2NJ | SIEMENS | 3 |
| Linear bearing | SDE Series | SIEMENS | 40+ |
| Needle bearing | IKDCF Series | SIEMENS | 6 |
| Dust collector | 2.2KW | Shanghai | 1 |
| Vacuum pump | 2BV2061-NC | Shanghai | 1 |
| Sensor | LJC30A4-H-A/AB2 | Shanghai | 1 |
| Air switch | 5SJ63 Series | SIEMENS | 5 |
Price List
| Description | QTY | Unit Price (FOB Ningbo) |
|---|---|---|
| NJP-1200 Automatic Capsule Filling Machine (S.S.304L) | 1 | 18000USD |
| Extra full set of mould | 1 | 2700USD |
| Pellet feeding device | 1 | 2700USD |
| Dosage device | 1 | 600USD |
| Auto powder loading device | 1 | 2500USD |
HPJ-A Capsule polishing and sorting machine
Applying
This machine is used for polishing and sorting capsules.
Features
- Small size, attractive appearance with adjustable height and angles. Connects to any capsule filler for timely polishing.
- Automatically sorts out low weight, empty bodies, scrap, and loose pieces to meet GMP standards.
- High-quality stainless steel polishing chamber with quick-connecting parts for easy cleaning.
- Quick-detachable brush and bearing; brush hair will not drop. Supports different brush sizes.
- Safety device equipped; motor speed controlled by converter for long-term stable operation.
Parameter
| Model | HPJ-A |
|---|---|
| Speed | 7000 pcs/min (polishing), 3500 pcs/min (sorting) |
| Power | 245W 220V 50Hz |
| Machine size | 1300*500*1200 (mm) |
| Machine weight | 55Kg |
Our other models of capsule filling machine
Frequently Asked Questions (FAQ)
The NJP-1200 is specifically designed to fill either powder or pellets into pharmaceutical capsules efficiently.
It features an automatic rejection function. Ineligible capsules (flat, undivided, or empty) are eliminated automatically, allowing the medicine to be recycled and reused.
Yes, the machine meets GMP requirements. All contact parts are made of high-quality stainless steel (S.S.304L) to ensure no organic material contamination.
Yes, the NJP-1200 supports capsule sizes from No. 00 to 5. Different moulds can be replaced manually to accommodate various production needs.
The HPJ-A polisher not only cleans the capsules but also sorts out low-weight or scrap pieces, significantly improving the final product quality and production efficiency.
The machine is equipped with sensors that trigger an automatic stop and alarm when there is a lack of material or a breakdown, ensuring safe operation.